PLEASE READ DESCRIPTION CAREFULLY TO AVOID ORDERING WRONG PRODUCT!
Ford Super Duty 40 Gallon (Diesel) Plastic Fuel Tank F250 F350 F450 F550 (asa-f1115-kit1)
$675 Free Shipping to the Continental 48 States (contact us for shipping rates elsewhere)
ALL STATE 4 WHEEL DRIVE
If you don’t find what you are looking for please contact us via phone or email at: AllState 4WD Warehouse 7N300 Rte. 31 South Elgin, IL  60177 (847) 971-5223 Jeepparts@att.net
FORD SUPER DUTY 40 GALLON (DIESEL) PLASTIC FUEL TANK F250 F350 F450 F550 (asa-f1115-k1) FORD REAR MOUNT 40 GALLON DIESEL SUPER DUTY FUEL TANK FITS THE FORD SUPER DUTY F250 F350 F450 F550 FITS 2011-2015 YEAR SPAN TANK MOUNTS BEHIND THE REAR AXLE THESE ARE BRAND NEW TO THE MARKET AND THERE MAY HAVE A SLIGHT SHIPPING DUE TO DEMAND.  THE TANK IS MADE OF POLYETHYLENE AND REPLACES THE FACTORY METAL TANK.  BE ONE OF THE FIRST TO REPLACE THE PROBLEM METAL FORD FACTORY TANK WITH A NEW POLY FUEL TANK...... - PICTURES SHOWN ABOVE, SHOW INSTALLING IN A 2012 MODEL - NOTE THE FOLLOWING: MUST RE-USE YOUR ORIGINAL SENDING UNIT, SKID PLATE & STRAPS... YOU MUST KEEP THE LOCK RING AND USE IT TO INSTALL THE SENDING UNIT IN THE NEW TANK (SHOWN IN PIC’S). SEVEN BOLTS & WASHERS ARE INCLUDED ALONG WITH A SENDING UNIT GASKET AND THREAD SEALANT. THE SKID-PLATE DOES NOT COME WITH THE TANK, MUST USE THE ORIGINAL PLATE, STRAPS AND SENDING UNIT. THE 7 BOLT HOLES ARE ARRANGED IN A SPECIFIC PATTERN SO THE SENDING UNIT CAN BE INSTALLED THE SAME WAY AS THE ORIGINAL SETUP. THIS ARRANGEMENT WILL ALLOW THE FUEL BOWL (ON THE SENDING UNIT) TO SEAT PROPERLY IN THE BOTTOM OF THE TANK. YOU CAN FEEL THE SENDING UNIT “LOCK” INTO THE BOTTOM OF THE TANK. THE BOTTOM PICTURE SHOWS HOW WE MOLDED THE BOTTOM TO MIMIC THE METAL TANK.
AllState 4WD Warehouse 7N300 Rte. 31 South Elgin, IL  60177 (847) 971-5223 Jeepparts@att.net
ALL STATE 4 WHEEL DRIVE
Ford Super Duty 40 Gallon (Diesel) Plastic Fuel Tank F250 F350 F450 F550 (asa-f1115-kit1)
If you don’t find what you are looking for please contact us via phone or email at: AllState 4WD Warehouse 7N300 Rte. 31 South Elgin, IL  60177 (847) 971-5223 Jeepparts@att.net
$675 Free Shipping to the Continental 48 States (contact us for shipping rates elsewhere)
FORD SUPER DUTY 40 GALLON (DIESEL) PLASTIC FUEL TANK F250 F350 F450 F550 (asa-f1115-k1) FORD REAR MOUNT 40 GALLON DIESEL SUPER DUTY FUEL TANK FITS THE FORD SUPER DUTY F250 F350 F450 F550 FITS 2011-2015 YEAR SPAN TANK MOUNTS BEHIND THE REAR AXLE THESE ARE BRAND NEW TO THE MARKET AND THERE MAY HAVE A SLIGHT SHIPPING DUE TO DEMAND.  THE TANK IS MADE OF POLYETHYLENE AND REPLACES THE FACTORY METAL TANK.  BE ONE OF THE FIRST TO REPLACE THE PROBLEM METAL FORD FACTORY TANK WITH A NEW POLY FUEL TANK...... - PICTURES SHOWN ABOVE, SHOW INSTALLING IN A 2012 MODEL - NOTE THE FOLLOWING: MUST RE-USE YOUR ORIGINAL SENDING UNIT, SKID PLATE & STRAPS... YOU MUST KEEP THE LOCK RING AND USE IT TO INSTALL THE SENDING UNIT IN THE NEW TANK (SHOWN IN PIC’S). SEVEN BOLTS & WASHERS ARE INCLUDED ALONG WITH A SENDING UNIT GASKET AND THREAD SEALANT. THE SKID-PLATE DOES NOT COME WITH THE TANK, MUST USE THE ORIGINAL PLATE, STRAPS AND SENDING UNIT. THE 7 BOLT HOLES ARE ARRANGED IN A SPECIFIC PATTERN SO THE SENDING UNIT CAN BE INSTALLED THE SAME WAY AS THE ORIGINAL SETUP. THIS ARRANGEMENT WILL ALLOW THE FUEL BOWL (ON THE SENDING UNIT) TO SEAT PROPERLY IN THE BOTTOM OF THE TANK. YOU CAN FEEL THE SENDING UNIT “LOCK” INTO THE BOTTOM OF THE TANK. THE BOTTOM PICTURE SHOWS HOW WE MOLDED THE BOTTOM TO MIMIC THE METAL TANK.
PLEASE READ DESCRIPTION CAREFULLY TO AVOID ORDERING WRONG PRODUCT!